Brickflow Guides | Property Finance & Development Advice

The Smart Guide to Commercial Mortgages

Written by Jenna Young | Nov 18, 2026, 11:19:10 AM

A deep-dive into commercial mortgages for experienced investors and first-time commercial buyers who want to understand how lenders assess risk, structure leverage, and price deals in practice.

 

Contents:

Commercial lending is always about the numbers

While residential lending can be influenced by personal considerations, commercial lending is driven by the numbers. Lenders value commercial property on the income it produces, or has the potential to produce, and on how that yield supports market value.

In practice, commercial mortgage lenders focus on gross rent, net rental income where relevant, lease length, tenant covenant, market yield, and interest cover or debt service cover. For owner-occupied commercial mortgages, the calculations are similar, but serviceability is tied to business accounts rather than tenancy income.

If income works under stress, the deal works. If it does not, the loan size is reduced or the deal is unviable, regardless of property type, location or condition.

Use classes: why they matter

Use class has a direct impact on liquidity, risk and lender appetite. Following legislative reform, most commercial activity now sits within Class E, though distinct categories such as industrial, residential and community uses still matter in underwriting.

Class E – commercial, business and service

Class E covers shops and retail outlets, restaurants and cafés for on-site consumption, financial and professional services such as banks and estate agents, and offices, research and development, and light industrial use.

It is generally the most flexible and lender-friendly class. A vacant retail unit that can lawfully become an office, gym, café or medical practice without a full planning process is easier to re-let or repurpose, which lowers risk and can improve leverage and pricing.

Other classes lenders watch closely

  • Class B – industrial and storage: B2 general industrial assets can attract added scrutiny around operations and environment. B8 storage and distribution assets are often well regarded because they can offer long leases and strong logistics demand.
  • Class C – residential and hospitality: C1 hotels and guest houses are often underwritten with trading accounts alongside property valuation. C3 and C4 assets sit in a different risk profile again.
  • Class F – community and learning: These assets may offer secure income, but they are often harder to sell than flexible Class E property, which raises exit risk.

Behind the scenes, use class affects exit strategy, alternative use value, valuation assumptions, stress testing and the lender pool available to you.

How lenders determine pricing and rates

Commercial mortgage pricing normally starts with a reference rate, typically SONIA or the Bank of England Base Rate, with a margin added to reflect transaction-specific risk. Specialist non-bank lenders often rely on wholesale funding, so their cost of capital is usually higher than a deposit-funded bank.

Margins are shaped by asset class, tenant covenant strength, lease term, location depth, loan size, leverage, prevailing funding conditions, internal capital allocation and wider market conditions.

A single-let industrial unit with a long lease to a national covenant in a prime logistics location will generally attract a lower margin than a secondary retail parade with local tenants and short leases.

Typical margins by asset type

Asset type Typical margin* Notes
Prime Industrial (B8) +1.75%–3.0% Strong demand, long leases
Offices (Class E) +1.75%–3.5% Location dependent
Hotels (C1) +1.75%–5.0% Trading risk
Retail (Class E) +2.5%–5.0% Sensitive to tenant strength
Mixed-use +2.5%–5.5% Complexity premium
Vacant property +4.5%–6.0%+ No income means higher risk

*These indicative margins reflect prevailing UK market conditions and vary by lender appetite, deal structure and funding markets.

Commercial mortgage pricing is therefore an all-in rate: cost of funds plus lender margin. As an example, SONIA at 5.0% with a 4.0% margin produces a 9.0% rate.

Different metrics for different assets

Not every commercial asset is assessed in the same way. Lenders change the weighting of income quality, tenant risk, reletting risk and valuation basis depending on the property type.

Factor Industrial (B8) Offices (E) Hotels (C1)
Income type Lease-based Lease-based Trading income or lease-based
Key metric Rent and covenant Rent and demand EBITDA, NOI, or rent and covenant
Lease importance Very high High High where leased
Tenant risk Moderate Moderate to high Operator risk is critical
Re-letting risk Low to moderate Moderate High
Valuation basis Yield Yield Trading multiple or yield where leased

How commercial lenders think

Most deals pass through three overlapping filters that lenders assess at the same time.

1. Asset risk

Lenders test whether income is sustainable, whether the location is proven, whether the tenant covenant is strong, whether there is reletting risk, and whether the use class supports flexibility and exit.

Long leases to strong national covenants are naturally viewed more favourably than short leases to unknown businesses. Lenders are not just underwriting today’s tenant. They are underwriting the next lease as well.

2. Borrower risk

Liquidity matters, experience matters, and track record matters. A stronger borrower can sometimes secure higher leverage on the same asset because the overall risk profile improves.

3. Market risk

Credit committees also manage exposure across their wider loan book. If a lender already has significant retail exposure, appetite may tighten even if the asset itself is reasonable. A specialist broker who is active in the market every day will often know where that appetite sits.

Understanding the real impact of leverage

Equity is the most expensive capital in any funding structure because it is the hardest capital to replace. In commercial mortgages, leverage is a balance between pricing, serviceability and capital efficiency.

A lower loan-to-value ratio reduces debt exposure and usually improves interest cover and pricing, but it also ties up more of your equity in one asset. A higher LTV reduces the equity requirement and can increase return on equity, but only if the deal still works under stress.

LTV is never assessed in isolation. Lenders stress test income against higher assumed rates and look at the durability of rental cashflow over time. If the income is volatile or reletting risk is elevated, leverage can be capped regardless of borrower strength.

Banks vs specialist commercial lenders

High street banks often lead with lower headline rates, but the right commercial mortgage is about more than the rate.

High street banks typically

  • Operate under tighter capital rules
  • Apply stricter covenants
  • Move more slowly
  • Prefer standard, non-complex assets
  • Prefer repayment structures

Specialist lenders typically

  • Price risk on the specifics of the asset rather than broad policy bands
  • Can work with more complexity
  • Offer higher leverage in the right circumstances
  • Provide more structural flexibility
  • Will often allow interest-only structures

Specialist lenders can have a deeper understanding of niche sectors because they work in them more often. A bank may decline a multi-tenant building with short leases because it does not fit internal parameters, while a specialist lender may assess the reletting story in more detail and still proceed.

 

Structure can matter more than rate

Two borrowers with similar credit backgrounds and similar assets can secure the same rate and still end up with very different loans.

Look closely at interest-only versus amortising structures, covenant triggers, revaluation frequency, early repayment charges, and flexibility to release equity later. A small difference in rate can matter less than a structure that actually fits the transaction and your hold strategy.

Commercial mortgage deal killers

Most declined deals fail not because they are impossible, but because they are poorly positioned. Lenders will usually walk away when they see:

  • Over-optimistic rental assumptions: if the income case is unrealistic, the deal usually stops there.
  • Weak lease documentation: lenders need confidence in the tenant and the lease itself.
  • Planning ambiguity: if current or future use is unclear, valuation and exit become harder to support.
  • Environmental red flags: uncertain site conditions, legacy industrial issues or contamination can derail a loan very quickly.

How to position a deal professionally

Commercial mortgage lenders want to lend, but they will only lend on a deal that is clearly viable and presented professionally.

A strong application usually includes clean lease documentation, clear planning use class information, realistic refurbishment or repositioning costs, clear planning risks where relevant, strong credit references, detail on wider assets and liabilities, and evidence that the borrower understands stress testing.

You should also think one refinance ahead. If rates rise or values fall, does the deal still refinance comfortably? If a tenant leaves, is the asset still re-lettable within its use class?

The application process

1. Prepare the business plan

Before approaching lenders, you should be able to explain why the property is viable and how it fits your wider investment or business strategy. A credible plan covers business objectives, financial projections, property usage and exit.

2. Financial assessment

Lenders then assess credit profile, business income or trading history where relevant, rental agreements, and existing debt exposure. They will also expect you to budget for arrangement fees, valuation fees and legal costs.

3. Provide documentation

  • Borrower profile: investment CV, experience and overall financial position
  • Business financials: trading accounts and financial reports, usually for the previous two years
  • Banking and income evidence: statements and proof of income where required
  • Asset and liability position: wider debt exposure and property holdings
  • Property information: valuation reports, tenancy schedules and supporting information
  • Lease documentation: full lease agreements and tenant information for investment property
  • AML and source of funds: ID, proof of address, deposit evidence and source of wealth

4. Identify the right lender

Not every lender suits every asset. Different institutions specialise in different sectors, leverage levels and risk profiles. This is where an experienced and tech-enabled broker can materially improve the outcome.

5. Underwriting and offer

Once a lender is chosen and the application is submitted, the deal moves through initial assessment, valuation, underwriting and then formal offer. At that point the legal process begins before funds are released.

Timelines

Most commercial mortgage transactions complete in around 8 to 14 weeks, although mixed-use assets, specialist sectors and refurbishment-heavy deals can take longer. Preparation makes a significant difference.

Case studies

Case study 1: Development exit via commercial refinance

An experienced property company secured a long-term commercial mortgage to refinance a completed mixed-use development with 7 residential units and a pre-let commercial space.

  • Property value: £3.3m
  • Net loan: £1.3m (41% LTV)
  • Product: 5-year fixed commercial mortgage
  • Loan term: 10 years
  • Interest rate: 6.79%
  • Repayment: Interest-only
  • Total income: £241,800 per annum

The refinance repaid the bridging facility and secured longer-term, lower-cost funding against a fully let, income-producing asset.

Case study 2: Residential investment refinance (MUFB)

An experienced borrower refinanced a recently converted 10-unit freehold block in Leeds city centre onto a stabilised commercial investment facility.

  • Property value: £1.75m
  • Net loan: £1,312,500 (75% LTV)
  • Borrower equity: £437,500
  • Product: 5-year fixed commercial mortgage
  • Loan term: 10 years
  • Interest rate: 6.14%
  • Repayment: Interest-only
  • Monthly payments: £6,715
  • Gross rent: £129,600 per annum

The refinance moved the borrower off development finance and onto longer-term funding that supported cash flow and a hold strategy.

Case study 3: Multi-tenanted office refinance

An investor secured a large-scale commercial mortgage against a multi-tenanted office block using a staged structure designed to manage cost of capital over the term.

  • Property value: £96m
  • Net loan: £52.8m (55% LTV)
  • Product: 18 months + 18 months + 18 months
  • Loan term: 4.5 years
  • Interest rate: 5.85% (2.5% + 3-month SONIA)
  • Repayment: Interest-only
  • Total income: £5.46m per annum

The staged structure gave the borrower access to a lower cost of capital across the full term, secured against a substantial income-generating office asset.

Commercial mortgages as a strategic tool

Commercial mortgages are debt, but for professional investors they can also be a strategic tool. Used intelligently, they can improve capital efficiency, support portfolio growth and preserve equity for the next opportunity.

Professional investors building substantial portfolios understand lender psychology, structure deals carefully and keep capital available for the next move.

For more information on securing a commercial mortgage, email us at info@brickflow.com or run your numbers through Brickflow’s commercial mortgage calculator.